← Las 62 calculadoras de ingeniería
bolt_groupDisciplina: mechanical/connectionEccentrically Loaded Bolt Group (Elastic Vector Method)
Instantaneous/elastic vector superposition of direct shear plus torsional moment on multi-bolt fastener patterns.
Estado de validación: Verificado · Motor determinista (Referencia de ingeniería no estatutaria)
Esquema de parámetros de entrada
| Parámetro | Requerido | Tipo / Rango | Descripción |
|---|---|---|---|
| bolts | Requerido | number | Bolts (mm) |
| boltDia_mm | Requerido | number · [12, 36] | Bolt Dia Mm |
| Fnv_MPa | Requerido | number · [150, 600] | Fnv MPa (N) |
| Px_kN | Opcional | number | Px K N |
| Py_kN | Opcional | number | Py K N |
| e_mm | Opcional | number | E Mm |
| Mz_kNm | Opcional | number | Mz K Nm |
| threadsIncluded | Opcional | boolean | Threads Included |
Llamada REST API
curl -s -X POST https://nexyfab.com/api/eng-chat/action \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $NEXYFAB_API_KEY" \
-d '{
"message": "Run bolt_group with {\"bolts\":10,\"boltDia_mm\":13,\"Fnv_MPa\":151}",
"domain": "mechanical",
"lang": "es"
}'Carga JSON OpenAPI
{
"endpoint": "/api/eng-chat/action",
"method": "POST",
"body": {
"message": "Run bolt_group with {\"bolts\":10,\"boltDia_mm\":13,\"Fnv_MPa\":151}",
"domain": "mechanical",
"lang": "es"
}
}Calculadoras relacionadas
weld_connection
Fillet Weld Joint Strength Check (AISC / KDS 14 31 25)
shaft_design
Power Transmission Shaft Sizing (Combined Bending & Torsion)
spring_design
Helical Compression Coil Spring Design (Wahl Factor)
bearing_life
Rolling Bearing L10 Rating Life (ISO 281)
tolerance_stack
1D Tolerance Stack-Up Analysis (Worst-Case & RSS / Cpk)
gear_bending
Spur Gear Tooth Bending Strength (Lewis Equation)
Referencia determinista de ingeniería (no estatutaria). Se requiere revisión profesional acreditada antes de producción.