← Las 62 calculadoras de ingeniería
occupancy_egressDisciplina: interiorOccupancy Load & Egress Width Verification
Occupant load calculation, minimum exit count, and effective egress corridor/door width verification for building interiors.
Estado de validación: Borrador · Motor determinista (Referencia de ingeniería no estatutaria)
Esquema de parámetros de entrada
| Parámetro | Requerido | Tipo / Rango | Descripción |
|---|---|---|---|
| floorAreaM2 | Requerido | number · [0, 100000] | Floor Area M2 (m) |
| occupantDensityM2 | Requerido | number · [0, 20] | Occupant Density M2 (m) |
| seatCount | Opcional | number · [0, +∞] | Seat Count |
| egressWidthProvidedMm | Opcional | number · [0, +∞] | Egress Width Provided Mm (mm) |
| egressFactorMmPerOcc | Opcional | number · [1, 20] | Egress Factor Mm Per Occ (mm) |
| exitCount | Opcional | number · [1, +∞] | Exit Count |
| doorClearWidthMm | Opcional | number · [0, +∞] | Door Clear Width Mm (mm) |
Llamada REST API
curl -s -X POST https://nexyfab.com/api/eng-chat/action \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $NEXYFAB_API_KEY" \
-d '{
"message": "Run occupancy_egress with {\"floorAreaM2\":1,\"occupantDensityM2\":1}",
"domain": "architecture",
"lang": "es"
}'Carga JSON OpenAPI
{
"endpoint": "/api/eng-chat/action",
"method": "POST",
"body": {
"message": "Run occupancy_egress with {\"floorAreaM2\":1,\"occupantDensityM2\":1}",
"domain": "architecture",
"lang": "es"
}
}Calculadoras relacionadas
acoustic_tl
Single-Leaf Wall Sound Transmission Loss (Mass Law)
duct_sizing
HVAC Duct Sizing (Velocity Method)
pipe_sizing
Water Supply Pipe Sizing (Velocity & Hazen-Williams)
fixture_supply
Plumbing Fixture Supply Demand Check (WSFU)
reverb_time
Room Reverberation Time RT60 (Sabine & Eyring)
point_illuminance
Point-by-Point Illuminance (Inverse-Square & Cosine Law)
Referencia determinista de ingeniería (no estatutaria). Se requiere revisión profesional acreditada antes de producción.