← Las 62 calculadoras de ingeniería
fatigue_goodmanDisciplina: mech/fatigueModified Goodman / Soderberg / Gerber Fatigue Safety Factor
Infinite-life and finite-life high-cycle fatigue safety factor calculation from alternating/mean stress, endurance limit Se, and UTS.
Estado de validación: Verificado · Motor determinista (Referencia de ingeniería no estatutaria)
Esquema de parámetros de entrada
| Parámetro | Requerido | Tipo / Rango | Descripción |
|---|---|---|---|
| sigmaA | Requerido | number · [0, +∞] | Sigma A (MPa) |
| sigmaM | Requerido | number · [-500, +∞] | Sigma M (m, MPa) |
| Se | Requerido | number · [0, +∞] | Se (MPa) |
| surface | Opcional | string · enum: ground, machined, hotRolled, asForged | Surface — options: ground | machined | hotRolled | asForged |
| dia_mm | Opcional | number · [0, 254] | Dia Mm |
| loadType | Opcional | string · enum: bending, axial, torsion | Load Type — options: bending | axial | torsion |
| reliability | Opcional | string · enum: 50, 90, 95, 99, 99.9 | Reliability — options: 50 | 90 | 95 | 99 | 99.9 |
| lifeMode | Opcional | boolean | Life Mode (N) |
| minerBlocks | Opcional | number | Miner Blocks |
| Su | Requerido | number · [0, +∞] | Su (MPa) |
| Sy | Opcional | number · [0, +∞] | Sy (MPa) |
| nRequired | Opcional | number · [1, 10] | N Required |
Llamada REST API
curl -s -X POST https://nexyfab.com/api/eng-chat/action \
-H "Content-Type: application/json" \
-H "Authorization: Bearer $NEXYFAB_API_KEY" \
-d '{
"message": "Run fatigue_goodman with {\"sigmaA\":1,\"sigmaM\":-499,\"Se\":1,\"Su\":1}",
"domain": "mechanical",
"lang": "es"
}'Carga JSON OpenAPI
{
"endpoint": "/api/eng-chat/action",
"method": "POST",
"body": {
"message": "Run fatigue_goodman with {\"sigmaA\":1,\"sigmaM\":-499,\"Se\":1,\"Su\":1}",
"domain": "mechanical",
"lang": "es"
}
}Calculadoras relacionadas
vibration_basic
Beam Natural Frequency & Harmonic Transmissibility
thermal_stress
Constrained Thermal Stress & Linear Expansion
weld_connection
Fillet Weld Joint Strength Check (AISC / KDS 14 31 25)
bolt_group
Eccentrically Loaded Bolt Group (Elastic Vector Method)
shaft_design
Power Transmission Shaft Sizing (Combined Bending & Torsion)
spring_design
Helical Compression Coil Spring Design (Wahl Factor)
Referencia determinista de ingeniería (no estatutaria). Se requiere revisión profesional acreditada antes de producción.